Skip to main content

Two-Layer & Two-Color Inflation Machine GF-T45/3

gf-t45-3


Specifications

GF-T45/3
SPECIFICATIONS : 2 & 3 COLOR HDPE FILM INFLATION MACHINE
  MODEL GF-T45/2 (TWO COLOR HDPE FILM) GF-T45/3 (THREE COLOR HDPE FILM)
FEATURE MATERIAL TO BE USED HDPE
MAX. FILM WIDTH 800mm 1200mm
FILM THICKNESS Standard 0.008 ~ 0.08mm, possible to produce lower gauge
MAX. EXTRUSION CAPACITY 80 kg /hr 120 kg/hr
REAL PRODUCTION OUTPUT REAL PRODUCTION OUTPUT DEPENDS ON THE MATERIAL, FILM SIZE, OPERATION CONDITIONS, SKILL & EXPERIENCE
EXTRUDER
(TWO SETS)		 SCREW DIAMETER ψ45mm x 2 ψ45mm x 3
SCREW L/D RATIO 30:1 30:1
DRIVING MOTOR 15HP X 2 15 HP X 3
BLOWN FILM DIES ψ60/80mm ψ120/150mm
  NO. OF STRIPS 10+10 LINES  
CONTROL PANEL TYPE INDEPENDENT TYPE SWITCH BOARD (BOX)
TEMPERATURE CONTROLLER PID TEMPERATURE CONTROLLERS, COLD-START PROTECTION
COOLING UNIT TYPE EXTERNAL AIR COOLING TYPE BY DUALLIP AIR RING
AIR BLOWER 5HP 7.5HP
TAKE-UP UNIT FIXED TOWER, HEIGHT 4 M 5 M
TAKE UP ROLLER 900mm 1300mm
TAKE UP MOTOR 1/2HP 1HP
TAKE-UP SPEED MAX. 120M/min
BUBBLE GUIDE CAGE TYPE, BY MANUAL or MOTOR DRIVE
STEADY PLATE MADE OF WOOD
GUIDE UNIT BY TORQUE MOTOR or AC MOTOR + INVERTER
WINDING UNIT TYPE MANUAL or AUTO 1 or 2 STATION SURFACE WINDER or BOBBIN WINDER
BOBBIN CHANGE PNEUMATIC SYSTEM or MANUAL TYPE
FILM CUTTING PNEUMATIC SYSTEM or MANUAL TYPE
EFFECTIVE WIDTH 800mm 1200mm
WOUND-UP DIAMETER Max.1000mm or TO BE SPECIFIED BY BUYER
WINDING MOTOR BY TORQUE MOTOR or AC MOTOR + INVERTER
OPTIONS AUTO HOPPER LOADER, WIDTH CONTROL, CORONA TREATER, EMBOSSING UNIT, AIR SHAFT, MANUAL SCREEN CHANGER, LONG-LAST FILTER, CO-EXTRUSION DIE, DOUBLE STATION WINDER(UP/DOWN) OR BACK-TO-BACK TYPE), SEMI OR FULL AUTOMATIC WINDER.
AUTO HOPPER LOADER, SATURN AIRRING, PRESSURE & MELTING TEMP GAUGE, MANUAL SCREEN CHANGER, AUTO THICKNESS CONTROL, EXTRUSION CONTROL,WIDTH CONTROLLER,INTERNAL BUBBLE COOLING(IBC),
2 LAYER or ABA 3 LAYER CO-EXTRUSION DIE HEAD & AIR RING, 6” AIR SHAFTS, EDGE POSITION CONTROL (EPC),CENTER POSITION CONTROL(CPC),AUTO. TENSION CONTROL, HYDRAULIC UNLOADING UNIT, AIR CHILLER...etc.
REMARKS * Final specifications of the 2 & 3 color machine depend on the film application, material to be used, accepted thickness tolerance, and your special requirements.